Page 31 - HunterandHyland_Bespoke

TRACKS & RAILS
CURTAIN
REGULAR & DOUBLE DUTY CURTAIN TRACKS
Regular and double duty tracks provide a durable and cost-effective option for hanging curtains. The tracks are very strong and are suitable for use with medium to heavy weight curtains. These tracks can also be corded or uncorded and bent for bay windows.
REGULAR PROFILE DIAGRAM
REGULAR TRACK
Regular white painted steel track is a cost-effective, durable solution, ideal for use with pelmets.
· Made-to-measure (MTM) service (5 working days)
· Bending service for bay windows (angled and sweeps). Minimum radius 200mm C/L/R (7
working days)
· Corded and uncorded
· Top fix and face fix
· Suitable for up to medium weight curtains
· Single curtain or pair
· Can be supplied fitted to board
· Cannot be reverse bent
· Purchase as a complete assembled MTM track or as components
REGULAR MTM TRACK
When ordering regular corded MTM track please specify:
· Track length
· Fitting height
· Top fix or face fix
· Preference for cord weight or tension device (see pages 52 to 54 for options)
· Left hand pull, right hand pull or dual pull (corded each end)
CURTAIN TRACKS & RAILS
When ordering regular uncorded MTM track please specify: · Track length
· Top fix or face fix
Regular MTM tracks will be supplied with 12 pendulum gliders (05035) per metre, face fix track
will have brackets 05079 and 05046, and top fix tracks will have standard 05029 brackets.
REGULAR MTM TRACK ON BOARD
We can produce pelmet boards with or without facias, in almost any width. These can be painted or left unfinished. They can be made for straight or bay windows.
· When fitted to a pelmet board with facia - track is front edge fitted
· When fitted to a pelmet board without facia - track is fitted on spacers in the centre of the
board
· Bespoke MTM service, made to your specific requirements in any width from 25mm
· Stock widths are 141mm, 217mm and 293mm
· Boards are made from 21mm thick pine with optional 5mm hardwood facia
· Can also be made to fit a bay window to your specific measurements
· Track fitted to a board without facia will be centrally fitted. Track fitted to a board with facia will
be front fitted
· If fitted using angle brackets, a spacer can be used to raise the track from the surface of the
board to allow bracket to slide in under the track
· Board can also be produced with cutouts or in ‘D’ shapes to your specific measurements
· Can be produced with velcro attached to either the front or the front and returns
· Facia will be made to suit the depth of the track or can be made to your specific requirements
sales@hunterandhyland.co.uk www.hunterandhyland.co.uk page 31 Workroom & Supplies